2000彩平台

VersaFlex SL/90 is a self-leveling, 100% solids, semi-rigid, two component, rapid curing polyurea semi rigid joint filler. May be applied in temperatures down to -40°F. SL/90 is designed with low range adhesion strength similar to epoxy joint fillers which provides characteristics for separation during the concrete shrinkage process. Provides additional protection from spalling of joint edges/shoulders where heavy, hard wheel fork lift traffic are required. Ideal for industrial and warehouse applications where epoxy joint fillers would also be specified. Recommended time of concrete cure is a minimum of 28 days prior to installing joint filler or joint sealant.

VersaFlex SL/90 is used to quickly fill interior joints on horizontal concrete surfaces, to repair damaged control joints, random cracks, and freezer door thresholds. SL/90 may be used in interior control joint applications.

  • 100% solids, no VOC’s
  • Flexible, 315%+ elongation
  • Remains flexible in cold temperatures
  • Return project to service in 60 minutes
  • Cures from -40°F to 130°F
  • Odorless, No toxic vapor
  • USDA/FSIS approved
  • Complies with USDA/CFIA regulations
  • Resists jet fuel
% SolidsShore D HardnessShore A HardnessTensile Strength, psiTensile Elongation, %Modulus of Elasticity, kpsiTear Strength, pliTaber Abrasion, mg wt lossApplication Temp, °FGel TimeTack FreeFoot TrafficShave Time
10035-4590-951200 - 1400250 - 5500.6 - 0.9200 - 300400¹ - 500¹-40° - 130°60 seconds2 -3 minutes60 minutes20 minutes

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22